Caddx has launched a new competitor in the HD FPV camera category.
Caddx Turtle is a micro FPV camera that supports 1080p 60fps and is divided into two parts: FPV camera and HD DVR board.
Users who are constantly deciding whether to use a high-definition motion camera may find this option a great fit for their needs, especially those who are interested in reducing the weight of heavy-duty sports cameras but still want HD recording .
Image sensor: 1 / 2.7" CMOS sensor
TV system: NTSC / PAL, can be changed
Video resolution: 1080P @ 60fps / 1080P @ 30fps / 720 @ 60fps
Power input: DC 4.5-20V
FPV FOV: 155°
Recording field of view: 170 ° C
Mini lighting: 0.01LUX
Image resolution: 2 megapixels
Lens: 1.8mm Turbo Eye Lens
Working current: 380mA @ 5V / 160mA @ 12V (low power consumption)
OSD menu: Yes (support voltage display)
Video file: MP4
Electronic shutter: PAL: 1 / 50-100,000 NTSC: 1 / 60-100, 100
Signal to noise ratio: > 60dB (AGC OFF)
Video output: CVBS
Max Micro SD card support: 8-64GB (Class 10 or above is required, Class 10 / UHS-I / UHS-II is recommended)
Net weight: 12 grams (more or less)
- New Turbo Eye lens
- More reasonable PCB layout and 20x20mm mounting holes - no offset holes!
- Wrapped cable
- Default image setting improvements
Quick Operation Guide:
1. Right button: Press the RIGHT button for 3 seconds - 5 seconds to activate the video recording, while the light in the lower right corner flashes.
2. Left button: Press the left button for 3 seconds - 5 seconds to stop video recording.
3. Down button: Press the down button for 3 seconds - 5 seconds to switch the resolution, 720P blue LED is on, 1080P red LED is on, the default mode is 1080P.
4. MIDDLE BUTTON: The MIDDLE button is a menu button.
Note: The camera requires at least an 8G Class 10 SD card.
Note: If the video is accidentally cut off during video recording, please turn it on again, then the camera will automatically recover the memory.
Video recordings before power down will still be saved in the TF card.
1 x Caddx Turtle V2 camera
1 x 5D-OSD menu board
1 camera stand
1 x 30x30mm mounting bracket
1 x 4pin FPV silicon cable (expanded to 2-pin connector for OSD board and 3-pin connector for FPV)
1 hex wrench
1 x manual
1 x Warranty Card
Note: Full size metal brackets shown in some photos are not currently included.