Mini Hexacopter V2

US$70.00
Write a Review
Mini Hexacopter V2

mini-hexa-v2-4-thumb.jpg 

MINI HEX V2 SPECS

Frame Weight

129g

Motor to Motor

226mm

Main Plate Thickness

4mm

Motor Sizes

13XX-18XX

ESCs

20a

Prop Size

4"

LiPo

3S-4S/800-1300mah

Compatible PDBs

MiniPDB

MiniPDB v2

MiniPDB v3

Warrantied Parts

Carbon Fiber Main Plates
Carbon Fiber Arms

The new low-profile Mini Hex V2 has a lower Center of Gravity resulting in better flight characteristics and 9g lighter than its predecessor. It supports 13XX-18XX motors and 4" props. This quad is recommended for advanced builders only, the low profile makes everything very tight and all wires have to be hard soldered to the FC.

badge.png

The carbon fiber main plates and arms are covered by our lifetime warranty.

INCLUDED

4MM Carbon Fiber Main Frame
1.5MM Carbon Fiber Rear Top Plate
1.5MM Carbon Fiber Front Top Plate
1.5MM Carbon Fiber V3 Cam Braces x2
2x rubber dimes, 2x M2 washers, 2x sunknuts, 2x alumi thumbscrew
36mm gaskets
4 x 16mm M3 metal bolts (for PDB and flight controller)
4 x 4mm standoff (in between PDB and flight controller)
4 x M3 nylon nuts (for flight controller)
4 x 30mm M3 alumi standoffs (for front top plate)
4 x 13mm M3 alumi standoffs (for rear top plate)
8 x 7mm M3 metal bolts (for both top plates)
8 x 10mm M3 metal bolts (for securing standoffs onto main frame)
4 x 35mm landing skids, 4 x 12mm M3 metal bolts
Battery Strap
XT60 Connector
MiniPDB V3

WHAT ELSE IS NEEDED?

Flight Controller
ESCs x6
Motors x6
5V Regulator
Receiver [+ Transmitter of course!]
LiPo(s) [+LiPo Charger]
Lots and Lots and Lots of Props!

IF YOU WANT TO ADD FPV?

HS1177 Style Camera
Video Transmitter