IMPORTANT NOTE: This latest 2018 version (V1.4) is compatible with all ESC's, no matter how noisy they are.
Need hardware to mount this to your frame? Please take a look at this page.
Technical specifications:
- LiPo Input: 2-6S (5V-30V)
- Power rail: 3.3v,5v,9v,vbat
- 132A ( MAX display ) Current sensor with 160A PDB build in
- 6 layer 2oz Copper PCB
- Size: 36x36mm
- Mount Holes: 30.5 x 30.5 mm
- CPU - STM32F405RGT6 (F4 chip)
- MPU-6000
- Full SD Card socket
- Build in 5V BEC 2A
- Build-in User selectable 9v or 5v 2A Filtered BEC For camera and VTX
- Dedicated Camera setting control pads along with camera power signal pads
- Dedicated VTX connection with along with TX4 for easy connect and control VTX
- Build in Betaflight OSD
- 4 UARTS + USB (UART1 , UART3 ,UART4, UART6 ) (Pinout TX1, TX4,RX4, TX6,RX6 )
- 5V LED strip output
- 4 motors on each corner for a better layout.
- Support RX : Dedicated Sbus hardware inverted ,Satellite RX, Ibus,TBS Crossfire
- Dedicated hardware inverted connect to UART3 for smartport telemetry
- 4 in 1 esc socket with external current sensor input
- Support TP and Smartaudio VTX
- Buzzer pads for external buzzer
Important Note:
Electronics are not warrantied beyond being dead on arrival.
If for whatever reason you have no time to check the electronics within 7 days of receiving them, then no warranty or replacement will be granted.
So please only order this if you have time to check for proper functioning within 7 days of arrival.
Claims for defective parts emailed to us after this 7 days period is up will be denied.
